Mac Pro 2019

Mac Pro 2019 yang berharga dari USD5,999 mungkin akan menjadi bertambah mahal.

Sebelum ini, Apple telah mengesahkan bahawa Mac Pro 2019 akan dibina di kilang mereka di Austin, Texas tidak lama selepas mereka menerima pelepasan tarif bagi 10 komponen Mac Pro 2019 dari pihak Jabatan Perdagangan A.S.

Walaubagaimanapun, 5 lagi komponen Mac tersebut nampaknya tidak diluluskan permohonan dari pelepasan tarif 25% yang dikenakan kerajaan A.S ke atas syarikat China.

Ini adalah senarai 5 komponen Mac Pro 2019 yang terkesan dengan tarif tersebut:-

  • CPU Heatsink – This product is an input that dissipates the heat generated by a CPU.

Aluminum heatsink with dimensions 60.9mm length x 40.9mm width x 89mm height. The heatsink includes a heat pipe that utilizes phase change conduction to distribute heat to extremities and a mounting interface to connect to both a structural frame and main logic board.

Back input/output system (BIOS) printed circuit board for an ADP machine with dimensions of 158mm length x 126mm width x 20mm height. The board has two USB-A ports, two USB-C ports, and one audio jack port on a PCIe faceplate to allow passive air cooling of the module. The card edge of the board uses an 8-lane PCIe interface with a 0.65mm gold finger pin pitch.

  • AC Power Cable – This product is an input that transmits the appropriate amount of electricity from the AC mains to the internal power supply in an ADP machine.

Alternating current (AC) power cable that transmits electricity from an AC mains to the internal power supply in an ADP machine. The power cable has a length of 1.87 meters and a diameter of 6.8 to 9.6 millimeters, and has a braided nylon jacket. The power cable has a rubber rectangular backstop behind the 3-hole insert that fits flush against the surface of the computer enclosure.

  • Caster Wheel Assembly – The caster wheel assembly attaches to the bottom frame of an ADP machine for easy rolling and movement.

Modular caster wheel assembly having dimensions of 41mm wide x 73mm tall x 65mm deep for use with an ADP machine. The wheel assembly has a low-profile swivel bearing design and 16.25mm swivel lead distance. It also has a captive fastener mount. The center frame, stem and hubs are made from 316LI polished stainless steel, and the tires are made from polyurethane over polycarbonate.

  • Data Cable – The product connects an ADP machine to various external accessories, such as cellular phones and tablets, for charging and transmitting data.

USB-C to Lightning cable for an ADP machine having a length of 1.0 meter and a diameter of 4.2 millimeters capable of charging computer accessories, cellular phones, tablets and wireless communication devices. The cable includes a chip at each connection enabling it to communicate with and transfer data to and from computer accessories, cellular phones, tablets and wireless communication devices.

Berikut adalah alasan USTR (United States Trade Representative) mengapa 5 komponen Mac Pro itu tidak diluluskan dari pengecualian tarif:-

Apple failed to show that the imposition of additional duties on the particular product would cause severe economic harm to you or other US interests.

Setakat ini belum diketahui sama ada harga Mac Pro 2019 yang berharga dari USD5,999.00 itu akan mengalami peningkatan harga.

Mac Pro 2019 dijangka akan mula ditawarkan kepada pembeli antara bulan Oktober dan November tahun ini.

Sumber: Bloomberg

LEAVE A REPLY

Please enter your comment!
Please enter your name here